How to Root the Motorola Droid Pro [Root Guide] - From Android 2.3 Gingerbread to Jelly Bean

Unfortunately for the Motorola Droid Pro users there was no further updates regarding the device, meanwhile other device with the same specification as that of the Droid Pro are using ICS and Jelly Bean, Motorola's Droid Pro is still on Android 2.3 Jelly Bean. So feeling to get your Motorola Droid Pro into a Root ed Device ? Then i may recommend you in doing so as, Rooting helps you keep updated to superior features like ability to install root only apps, and even to uninstall system files and protected unwanted stock apps.

So if you are planning to do rooting, don't think over more other than its just a simple free process that does't need any expert skill but all you need to do is to keep a keen attention over the process! So lets get started!

Disclaimer : Attempt this at your own Risk! Recommended that you may please read the detail Disclaimer before your proceed. By reading this you may Please accept our policies to get the instructions leading you root your Device. Please dont use these steps in rooting a non prescribed device.

So lets get started!

Step I

Step 1 - Note that rooting your device voids the warranty of the Device. How ever can retain the warranty only if you had successfully Unrooted the Device from Root Mode.

Step 2 - Retain at least 50 % of the total battery charge before you start!

Step 3 - Download these files Prescribed below

Step II

Step 4 - Download and place the z4Root APK file onto your Desktop.

Step 5 - Connect your device to your PC using the USB cable.

Step 6 - Copy the APK file over to the root of your SD card. It’s the topmost folder.

Step 7 - Once copied, unplug your device from your PC.

Step 8 - Open the File Manager app on your device and install the APK you copied earlier.

Step 9 - Once installed, launch it from your App Drawer.

Step 10 - Tap on Root button in the app and it’ll start rooting your device.

Step 11 - Once it’s done, reboot your device.

Step 12 - That's it you're Done Rooting Your Device!

You will find an app installed on your device namely Superuser that lets you allow/deny root permissions to other apps!

If you feel any doubt, feel free to ask via commenting below!

Comments

Jailbreakers: It is safe to update to iOS 7.0.3, only if you’re on iOS 7/7.0.1/7.0.2

Apple released iOS 7.0.3 on 22 Oct 2013, with a number of Bugs being fixed and other improvements. After the official release of iOS 7.0.3 update, MuscleNerd warned jailbreakers to avoid being updated to iOS 7.0.3 as the update is yet to be analyzed the changes whether it was to be safe in upgrading. Upon the my personal review of jailbreaking i strogly recomend you in not to updating the latest version in improving your chances of jailbreaking your device. This time is no different, however if you’ve updated to iOS 7.0, iOS 7.0.1 or iOS 7.0.2 then MuscleNerd, member of the evad3rs has now confirmed that it is safe to update to iOS 7.0.3 as it does not impact the iOS 7 jailbreak that is currently in development. 7.0.3's lock screen fixes won't impact the JB (unless Apple's holding back here, hah! http://t.co/wI7A4BHZk2 ) — MuscleNerd (@MuscleNerd) October 22, 2013 @iphonesteven If you've already lost the JB by upgrading to 7.x, then yep it'...

Continue reading →

How to perform the tethered jailbreak using the updated seas0npass tools - Download the Seas0nPass Jailbreak

I will Explain you in how to perform the tethered jailbreak using the updated seas0npass tool with just a few steps. And if you are here in this article without the downloaded tools, please visit here to direct download files Apple TV2 Seas0nPass Jailbreak Available for iOS 5.2.1 / 6.1.3 Download Now T his is not complicated any one with just commensence can easily do this, and for that all you need is an, Apple TV 2’s power cable, silver aluminum remote, a micro USB cable and the downloaded tools. If you still if you have not downloaded the files yet please download it now by clicking here , i have provided both the versions for MAC (10.6 or later) and PC (XP or later) So let's get started. Note that : This works under the help of .Net Framework . Advicable to install .Net version 4.0.30319 in getting error reports Download via Microsoft / Direct Link Here ( Offline installer ) Step 1 open the downloaded zip file and extract it to a proper location....

Continue reading →

Android L Preview Images Are Now Available For Nexus 5 And 2013 Nexus 7

Its been a while since Android L took the tech world by storm thanks to material design, the new recent menu, improved notifications, and Project Volta. Still plenty of time away from the final release, Google has provided developer preview images that can be installed on end user devices. As per Google I/O 2014 keynote, the developer preview images are available for the Nexus 5 (hammerhead) and WiFi only 2013 Nexus 7 (razor). In order to install these images, you will need to run a full factory image install, which means all your current data will be lost. Before you start do not forget to backup your data. Those wishing to revert will need to download the appropriate Nexus restore images . Install L Preview System Image. Warning: This is a preview version of the Android system image, and is subject to change. Your use of this system image is governed by the Android SDK Preview License Agreement. The Android preview system image is not a stable release, and may cont...

Continue reading →

Googzone

Search This Blog